Household Pressure Washing Orange County is a great way to clean a lot of surfaces around the house. Not only do they provide a deep clean that can’t be reached with other means, but property owners don’t have to worry about harming delicate materials like siding and decks. It’s essential to know how homeowners can best care for their window panes during this process because one slip up can lead to big problems–literally! Here are some things you should know when using a pressure washer for your Orange County Window Cleaning.
Use the Correct Nozzle Setting
The first step is using the correct nozzle setting for your particular task at hand. Use either Nozzle A or C for cleaning windows because these settings leave no residue behind the soap you use. If you’re not sure which one works for your needs, switch back and forth between the two settings to determine which is best for your application.
After you’ve chosen your nozzle setting, it’s time to get down to business. You want to start at one corner of the pane and work backward so that any water left on the glass will run away from the woodwork instead of into it. It’s important to note that power washing water can cause damage if left sitting on untreated surfaces (like hardwood decks or vinyl siding), too–so follow these steps closely!
Use a Squeegee Where Needed
After spending some time using Nozzle A or C, you might find that there are still some stains left behind. If this happens, consider moving the tip side to side instead of up and down. You can also try choosing a different nozzle setting or using the “jet” (or “power”) setting if you’ve been working with one of the others. Be careful not to use this setting on delicate surfaces like Venetian blinds since it will cause damage!
Pressure washing works by pushing water out at high speeds, so don’t be surprised when your window looks wet after you’re done. Pressing some paper towels against the pane will help speed up the drying process–but be sure not to press too hard since too much pressure can lead to streaking! And once again: do not leave any water sitting on untreated surfaces for too long since it can cause damage.
Use Your Judgment (and wear protective equipment!)
Pressure washers are not toys. Wearing safety glasses and shoes with good traction is a good idea if you’re going to be operating one of these machines. Be careful when moving through doorways or near other surfaces where slippery footing could present a hazard–outside, for instance, or in the kitchen! And since pressure washers do not have onboard depth gauges like power saws, you should never point them at an angle towards yourself. Always keep pressure washing pointed straight ahead of you so that material or debris doesn’t fly back towards your face–or into open windows!
Other than that: take your time, being attentive to the hose, the power cord, and any other obstacles you’ll encounter while pressure washing. And for heaven’s sake: don’t take any shortcuts. If you see a plugged nozzle or your machine isn’t sending out enough water pressure–turn it off immediately! Finally, maintain sound footing at all times so that you remain firmly in place to direct the spray where it needs to go (and not on yourself).
A proper procedure is always recommended to avoid unwanted consequences, but that’s especially true for the pressure washer.
Read Our Blog: Best AirPods Alternatives
Always remember that water sprays are sent out at very high speeds and can easily cut through things. Also, keep in mind that the window you’re cleaning is only as strong as its frame or sealant. So if well-planned pressure washing isn’t done correctly, it could result in damage–or even potential health risks!–to your windows, to yourself, or even people nearby.
You should also ensure no one will walk by during the process since they might get splashed with water, which may ruin their clothing/shoes or hurt them!
To prevent this from happening, better do this if nobody will be walking by. If someone is coming, better wait until they clear the area.